ABB IRB 360 - System Shutdown Procedure

GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
Confirm the
information about
the loss of all
unsaved data
Yes
5.10 TURNING THE SYSTEM OFF
Turning off the system should be done in the following order:
Table 20 Turning off the system
Press one of the STOP
buttons
Press the STOP button and wait until the robot
completes the cycle and stops in the safe
position.
Turn the operating mode
selection key to the
position:
MANUAL
ABB Sp. z o.o.
Side 86/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03