ABB MAG-X 3000 Series - Page 55

PRIMARY ELECTRONICS HOUSING ASSEMBLY PARTS
KEY QTY DESCRIPTION PART NUMBER
1 1 Hsg Mach Div1/cs 10DX3111 323D513U06
2 1 Cover Cust Conn 10DX43 DIV.1 379D411U01
3 1 O-Ring, BUNA N 3.984IDX.139W 101A820U01
4 1 Tag, Cover 10DX3 338C670U01
5 4 M6X16 Posidrive Oval HD SCR SS 096A011U04
6 4 1/4 C’sunk Lockwasher 085M416V11
7 1 Zero Bd, DIV. I Series 3000 686B737U01
8 1 CMF; Dual or Single Mode (See Note 1) 686B738U01
9 6 #4-40 X 1/4 LG SEMS REC 096F004T10
11 1 1/2" NPT Conduit Seal Kit 699B391U01
15 1 1/2 Hex Soc Pipe Plug 316SS 112A352U21
16 1 Post,1/4"HEX,SS,3/8 Long, MF6-32 104D101U02
17 1 #6 INT Tooth Wash 410 SS 085F006V11
18 1 #6-32 X 1/4 LG SEMS REC 096H004T10
24 1 Label, Ground Symbol 338D277U01
30 1 O-Ring, BUNA N (NBR) 101A806U01
REF.: 614C115U03
NOTES:
1. The Primary CMF PC board is not interchangeable (see procedure 6.3.3 in Chapter 6.0 - MAINTENANCE. It
is suggested that the user return the flowmeter to the factory for repair and calibration. Consult a ABB
Automation service representative for assistance.
INSTRUCTION MANUAL 10DX3111A&G Sizes 14 - 24 Inches
7-3