MicrOS 410 Installation Guide 10
1 Introduction
The MicrOS 410 is a single-radio, Wi-Fi Bridge that is designed to connect serial or Ethernet
clients such as RTUs or PLCs to an ABB TropOS Wi-Fi mesh network.
The MicrOS 410 is designed for general purpose outdoor applications. It functions as a high-
power client radio. The MicrOS 410 is equipped with an integrated, directional antenna that
provides high gain, but must be aimed at the Wi-Fi device with which it will communicate.
The MicrOS 410 is available in both FCC/Industry Canada and ETSI versions.
It is available in two client-port versions:
One 10/100Base-T Ethernet port plus serial ports
Two 10/100Base-T Ethernet ports
This guide describes how to install the MicrOS 410. See the MicrOS User Guide for
configuration instructions.
To Next Page
Loading...