Access to all data ordered by device
This access method makes it possible to read or write data from all the connected devices with one request.
Address Data Length Access
...
Read
Write, Read
The total input data block length depends of the length of the AI, DI, diagnostics data of each configured
only three ports are used (e.g. port four used as spare) the data length for device four must be set to zero in
Access to all data ordered by data type
access method makes it possible to read or write data from all devices ordered by data type.
Address Data Length Access
... ...
registers
Read
... ...
registers
Write, Read
The total input data block length depends of the length of the AI, DI, Diagnosis data of each configured device.
ports are used (e.g. port four used as spare) the data length for device four must be set to zero in the input and
20 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
To Next Page
Loading...
