Need help?Do you have a question about the ABB MTQ22-FBP.0 and is the answer not in the manual?
General| Product ID | MTQ22-FBP.0 |
|---|---|
| ABB Type Designation | MTQ22-FBP.0 |
| Order Multiple | 1 piece |
| Type | Control Unit |
| Manufacturer | ABB |
| Voltage Rating | 24 V DC |
| Protection Class | IP20 |
Staff must ensure product use complies with safety laws, regulations, and standards.
Advices on network assessment, connection limits, monitoring, and separation for security.
Lists key features: Ethernet connectivity for devices, multi-device support, control commands, topology flexibility.
Details ring topology for cable redundancy using a managed switch and MRP.
Lists devices that can be connected to the MTQ22-FBP.0.
Covers Master config, Network settings, Device settings, Position supervision, and parameter overview.
Reading/writing entire I/O data with one Modbus TCP telegram per device.
Reading/writing I/O data from all devices in one telegram, ordered by data type.
Presents the Modbus address map for connected UMC100 devices, including individual access.
Details monitoring and command data access, including word/bit orientation.
Shows how to write command data for up to four UMCs in one block.
Explains reading monitoring data from UMCs in one block, ordered by data type.
To Next Page
