Reading the device communication status
for a detailed Modbus TCP address map.
the error reason.
Error Code Description Possible Reasons, Corrective Measures
established.
•
•
• Check that the drawer is inserted (in font size needs to be corrected here)
• See the section "Overview -> Supported FBP Devices" for a list
established but was lost again.
•
•
• Check that the drawer is inserted (in a withdrawable system)
Address mismatch. The configured device
not match.
•
•
General configuration error
•
• Check that no unsupported device was connected. See the section
"Overview -> Supported FBP Devices" for a list
•
(if own configuration was sent)
values
reserved
30 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
To Next Page
Loading...
