If the automatic mode is selected for the execution order from the PCM600
toolbar, the cycle time, execution order and instance number are automatically
assigned. Otherwise, set them manually before assigning.
Function blocks can also be inserted in the drawing area by dragging,
using the shortcut menu in Application Configuration, or by using the
shortcut keys CTRL+SHIFT+F.
5.2.7 Renaming main applications and objects
Main applications and objects in the Application Configuration can be renamed in the
Object Properties window.
1. Select the item to be renamed.
• To rename a main application, click a MainApp tab.
• To rename an object, click the object in the Application Configuration tool
window.
The data of the selected item is shown in the Object Properties window.
2. Enter the new name in the Name or User Defined Name field.
The field cannot be left empty. If the maximum length is exceeded or unallowed
characters are used, an error message is shown.
3. Click the Save button on the toolbar to save the new name.
Objects can also be renamed by right-clicking a function block in
Application Configuration and selecting Set User Defined Name, or
by pressing F2.
5.2.8 Finding application objects
In Application Configuration you can search and locate function blocks, variables,
hardware channels, text, signals, comments or graphical objects.
1. On the menu bar, select Edit and click Find.
• To use a simple search function, type in the text box search words, such as
symbol name, and click Find Next.
• To use an advanced search function, click Find Options, define the more
detailed searching options and click Find. The search results are shown on
Search Results field. Click an item on the list to locate it.
The finding function can also be started by pressing the shortcut keys
CTRL+F.
1MRS757866 C Section 5
Use cases for engineering and commissioning
PCM600 41
Getting Started Guide
To Next Page
Loading...
