3.1. Point to the symbol's connection point.
3.2. Drag the connection from the source connection port to the target
connection port.
A connection line between the source and target connection ports is drawn.
4. Modify the symbol properties in the Object Properties window.
4.1. Click an object in the Display Page.
4.2. In the Object Properties window, modify the properties, such as, naming
the symbol and placing the name.
5. Relate dynamic symbols to their source data.
5.1. Right-click the symbol and then click Select Input Signal.
5.2. Select the signal from the list.
6. Set the tab order of controllable objects in the Object Properties window.
The tab order defines the order in which the controllable objects are selected
when the Select button is pressed on the IED.
7. Click the Save button on the toolbar to save the diagram.
5.5.2 Exporting a template
Single-line diagrams created in Graphical Display Editor can be exported as templates
and reused.
1. Create a single-line diagram in the Graphical Display Editor tool.
2. On the menu bar, point to Graphical Display Editor and select Export Display
Pages as a Template, or on the File menu, point to Display Editor Template
and click Export.
3. Once the display page is selected, click Export.
The File save dialog box appears.
4. Browse the location to export the template and provide the file name.
By default, single-line diagram templates are saved in the drive where
PCM600 is installed <Drive:> \PCMDataBases\GDE\Templates
\<IED type folder>.
5.5.3 Importing a template
In Graphical Display Editor, an exported single-line diagram template can be
imported to another IED.
1. On the menu bar, point to Graphical Display Editor and select Import Display
Pages from Template or on the File menu, point to Display Editor Template
and click Import.
The Import GDE Template window appears with two sections, List of
Templates and Display Pages Preview.
2. Click Browse to select the template files.
1MRS757866 C Section 5
Use cases for engineering and commissioning
PCM600 53
Getting Started Guide
To Next Page
Loading...
