ABB PCS100 AVC-40-1B

12 PCS100 AVC-40-1B Roof Kit Assembly Instruction
b) Place top hat support brackets aligning with the holes of the roof of the PCS100 AVC-40-1B.
c) Use the four M16 rubber washers and schnors supplied with the roof top kit and four M16 bolts you
removed to mount the brackets on the PCS100 AVC-40-1B roof.
d) Place the top hat on the four brackets and use four M8 screws (Hex Torx) to mount the top hat into the
brackets.
e) Finished product should look like Figure 1-1.