6 PCS100 AVC-40-1B Roof Kit Assembly Instruction
—
Safety Notices
This document contains important information regarding the installation of the ABB PCS100 AVC-40-1B roof kit.
This assembly instructions provide technical guidance for installation engineers. The following safety
instructions are to be observed.
DANGER
This checklist does not provide sufficient information for safe service of the PCS100 AVC-40-
1B. For such service information refer to appropriate manual.
CAUTION – Trained Commissioning Engineers
All operations on the PCS100 AVC-40-1B must only be carried out by a trained commissioning
engineer familiar with the contents of this checklist. Hazardous conditions could arise from
incorrect adjustment.
DANGER – Stored Charge
Stored charge is present after the device is switched off.
DANGER – Protective Covers
Normal operation of this product
requires any protective covers in place and doors secured
closed.
DANGER – Personal Protection Equipment
Ensure safety glasses are worn while working if any part of the unit could be energized.
Ensure appropriate safety footwear is worn if inserting or removing modules or
components from the product.
To Next Page
Loading...
