PCS100 AVC-40-1B Roof Kit Assembly Instruction 3
—
Document Information
Copyright notice
The information in this manual is subject to change without notice. This manual and parts thereof must not be re-
produced or copied, or disclosed to third parties, nor used for any unauthorized purpose without written permis-
sion from ABB Ltd. The hardware and software described in this manual are provided under a license and may be
used, copied, or disclosed only in accordance with the terms of such license.
Document identification
Ownership: ABB Ltd., Power Conditioning Products
Document number: 2UCD740000E418
Issue date: 24/3/2022
Revision: Rev A
Contact information
Address: ABB Ltd. 111 Main North Road, Napier, New Zealand.
Website: https://new.abb.com/ups
This Document
This document contains information regarding:
– nstallation of the PCS100 AVC-40-1B roof kit
Usage
This document should be used when:
– installing the PCS100 AVC-40-1B roof kit
Who Should Read This Document?
This document is intended for:
– installation personnel
Prerequisites
An Installation Engineer working with the PCS100 AVC-40-1B must:
– be trained by ABB and have electrical operational and safety knowledge
– have sufficient training to operate in an accidentally touch safe service environment
– use this document in conjunction with the PCS100 AVC-40-1B User Manual
To Next Page
Loading...
