2 UNIVERSAL MOTOR CONTROLLER UMC100.3
Target group
This description is intended for the use of specialists in electrical installation and control and automation engineering who
are familiar with the applicable national standards.
Safety requirements
The responsible staff must ensure that the application or use of the products described satisfy all the requirements for
safety, including all the relevant laws, regulations, guidelines and standards.
Using this handbook
—
Symbols
This technical document contains symbols to point the reader to important information, potential risks and precautionary
information. The following symbols are used:
Indicates a potentially dangerous situation that can cause damage to the
connected devices or the environment.
Indicates important information and conditions.
Indicates a potentially dangerous situation that can cause human injuries.
—
Terms and abbreviations
Universal Motor Controller
—
Related documents
Technical documentation Document no.
Version information
This document is valid for:
—
Important notice
To Next Page
Loading...
