1SFC13105M0201 | Service Manual | Service PSTX470...570 63
5. Place fan cover
1
Thread the fan cables through the cable inlets.
2
Fasten fan cover to the unit with (6x) Torx
20 M4x8 (2,9Nm). Screws are to be mounted in
each corner, and on the center bracket, of the fan
cover.
6. Place top cover
1
Fasten top cover to the unit with (6x) Torx
20 M4x8 (2,9Nm). Screws are to be mounted in
each corner, and on the center bracket, of the top
cover.
REASSEMBLE THE SOFTSTARTER
Place PCBA, cables and front cover
Place the PCBA, connect all cables and install the
front cover as described in chapter 4.4.1, step
6-10.
Connect main power cables and control
cables
Connect the main power cables and the control
cables as described in chapter 4.3.4, step 1-2.
Tx 20
M4 x 8
(2,9 Nm)
6
4.5.4_6
1
2
Tx 20
M4 x 8
(2,9Nm)
7
4.5.4_7
1
To Next Page
Loading...
