ABB PSTX210 - 1 Read this first; Safety Symbols and User Guidance

4 Softstarters Type PSTX30...PSTX570 User Manual short form 1SFC132082M9901
EN
Thank you for selecting this ABB PSTX softstarter. Read carefully and make sure
you understand all instructions before you mount, connect and congure the
softstarter.
This manual is a short form manual intended for quick and easy installation of the
PSTX softstarter. For complete information, see 1SFC132081M0201 - Softstart-
ers Type PSTX30...PSTX570, Installation and Commissioning Manual available
on: http://www.abb.com/lowvoltage
When this manual refers to http://www.abb.com/lowvoltage: Select the link
Control Products, continue to Softstarters and type in the specied reference
in the search eld.
• The softstarter shall be installed by authorized personnel only.
• ABB personnel must obey the ABB CISE 15.4 instructions.
• This manual is a part of the PSTX softstarter and must always be
available to personnel that works with this material.
• Always read the full manual before you use the softstarter.
In the User Manual, these symbols are used:
The caution symbol in the left margin: if you don´t obey this instruction there is a
risk for personal injury.
The warning symbol in the left margin: if you don´t obey this instruction there is a
risk for damage to equipment or property
The information symbol in the left margin: tells the reader about relevant facts
and conditions
The graphics symbol in the right margin: refers to graphical information.
Approved personnel are allowed to install and make the electrical connection of
the softstarter in accordance with existing laws and regulations.
Examine the softstarter and the package when you unpack your new PSTX
softstarter. If there are damages, please speak to the transportation company or
the ABB reseller/ofce immediately.
Only approved personnel are allowed to do service and repair.
Note: not approved repair can effect the warranty.
Modications to data in this manual can be applied without notice.
1 Read this rst