1SFC132081M0201 | Installation and commissioning manual | Functions 131
7.23 Settings
The settings menu contains these Softstarter set-up
parameters:
• Language
• Date and time
• Display settings (for HMI)
• Reset from defaults
For settings and navigation, see chapter 6.4.6 Settings.
7.24 Assistants
The Assistants menu contains default settings and
parameters. Use this menu to set only the necessary
parameters before you can start the motor. All necessary
input data shows up in an automatic loop. The Assistants
menu is divided in:
• Basic set-up
• Application set-up
INFORMATION
After you select an application and make your
changes, do not select this application again
because this resets the application to the default
settings.
Enter the Assistants menu
Push “Menu” and select Assistants with the Navigation
keys.
Push “Select” to enter the Assistants menu.
Basic set-up
The Basic set-up menu is divided in 5 steps:
Language, Date and time, Motor data and System
configuration.
Application set-up
The Application set-up are quick settings for Applications,
Values and Tune settings. Use the Navigation keys to
select Application set-up. Push “Select” to enter the
Application set-up.
Select for what type of application you use the Softstarter
by pushing “Select”.
For more details, see chapter 2 Quick start.
7
To Next Page
Loading...
