ABB PVI-8.0-TL-OUTD - Tightening Torques; Overall Dimensions

- 19 -
000430BG
2 - Characteristics
Tightening torques
To maintain the IP65 protection of the system and for optimal installa-
tion, the following tightening torques must be used:
AC cable gland
11
M40 (ring nut xing)
5.0 Nm
AC cable gland
11
M40 (locknut xing)
8.0 Nm
Service cable glands
12
M20 (ring nut xing)
2.5 Nm
Service cable glands
12
M20 (locknut xing)
7.0 Nm
MC4 or Weidmuller quick t connectors
09 10
2.5 Nm
Front cover
03
1.5 Nm
AC output terminal block
15
- 16 mm² Max
1.5 Nm
Signal terminal block
18
- 1.5 mm² Max
0.25 Nm
Overall dimensions
The overall dimensions are expressed in millimetres and inches and in-
clude the wall installation bracket
645 mm
25.4”
224 mm
8.8”
716 mm
28.2”
TRIO