ABB REB650 - Broadcast Functionality Support

1.13 Broadcast
functionality
Capabilities Current Value If configurable, list
methods
1.13.1 Support for
broadcast functionality:
○ Disabled
● Enabled
○ Configurable
1.13.2 Write functions
(FC = 2) supported with
broadcast requests:
Write clock (g50v1 with
qualifier code 07):
○ Disabled
● Enabled
○ Configurable
(described elsewhere)
Write last recorded time
(g50v3 with qualifier
code 07):
○ Disabled
● Enabled
○ Configurable
(described elsewhere
Clear RESTART (g50v1
with qualifier code 00
and index = 7, value =
0):
○ Disabled
● Enabled
○ Configurable
(described elsewhere
Write of any other
group / variation /
qualifier code:
○ Disabled
● Enabled
○ Configurable
(described elsewhere
1.13.3 Direct operate
functions (FC = 5)
supported with
broadcast requests:
○ Disabled
● Enabled
○ Configurable
(described elsewhere
1.13.4 Direct operate,
no acknowledgment
functions (FC = 6)
supported with
broadcast requests:
○ Disabled
● Enabled
○ Configurable
(described elsewhere
1.13.5 Immediate
freeze functions (FC =
7) supported with
broadcast requests:
● Disabled
○ Enabled
○ Configurable
(described elsewhere
1.13.6 Immediate
freeze, no
acknowledgment
functions (FC = 8)
supported with
broadcast requests:
● Disabled
○ Enabled
○ Configurable
(described elsewhere
Table continues on next page
Section 3 1MRK 511 419-UUS A
DNP3 protocol implementation
48 650 series 2.2 ANSI
Point list manual