19
5. WebREF Configuration
With the Configuration Tool of REF 542plus the WebREF function can be
enabled and configured. To have the single line diagrams correctly displayed
on the Web page, some requirements in the graphical design of SLD are
needed. They are described in more detail in this chapter.
The language file can be configured to the user needs. Two languages can be
displayed, thereby the English language is always available. If a local
language, for example Chinese, is selected by the user, the English language
becomes automatically the second one. Then the local language is the default
one on the pages, when starting the WEBREF functionality on the PC.
The GSM and the network configuration are handled by the Configuration
Tool as well.
5.1. SLD design constraints
Drawing of busbar symbol has to be on the same vertical coordinates and the
whole width of the drawing field should be used.
*
The vertical Y-coordinates should be the same (Example: 7)
*
Use the whole width X-coordinates (Example: 0, 118)
1MRS755865
Multifunctional Protection and Switchbay
Control Unit
Installation Manual for Web Interface
Installation manual
REF 542plus
To Next Page
Loading...
Need help?
General
