A051100
Fig. 5.4.-1 Parameter setting for the Ethernet network
In the TCP/IP configuration these 3 options can be set for each REF 542plus.
In case there is no router in place, the default gateway address can be left
open. The subnet mask is set to a default value of 255.255.252.0.
For more information, refer to Section 6.4.2. TCP/IP configuration.
5.5. Set WEB SERVER properties
After pushing the related button the following Fig. 5.5.-1 appears:
A060414
Fig. 5.5.-1 WEB SERVER properties for Users Configuration
The user can add and edit users and the corresponding passwords. Removing
users can also be done from here.
22
REF 542plus
Multifunctional Protection and Switchbay
Control Unit
Installation Manual for Web Interface
Installation manual
1MRS755865
To Next Page
Loading...
