22
1MRS750500-MUM
Feeder and Machine Terminals
Operator’s Manual
REF 54_ , REM 54_
4.3.2. MEASUREMENT view
When the MEASUREMENT view is opened to the main window, the values
measured by the terminal will be shown on the display. The [
↑] and [↓] buttons are
used for scrolling up and down the list in the window.
Fig. 4.3.2.-1 MEASUREMENT view
4.3.3. EVENT view
The event view contains the application name, channel number, code, date and time
of the last 100 operations. The most recent recorded event is stored on top of the
event list.
Fig. 4.3.3.-1 EVENT view
loadview
C
E
R
L
F
I
0
R
L
IL1-A 800
IL2-A 803
IL3-A 800
I0 0
I0b 0
U1 kV 11.5
U2 kV 11.5
U3 kV 11.5
U0-V 0
kW L1 7360
kW L2 7360
kW L3 7360
MEASUREMENT
Updating values
MIMIC EVENT
[C] button functions in the
MEASUREMENT view
• If there are active indications, press [C] for
2 s to reset
• When there are no active indications, press
[C] for 2 s to reset the accumulated energy
measurements
C
E
R
L
F
I
0
R
L
eventvie
Events
NOC3Low: 31/E1
95-12-24
18:35:12:230
NOC3Low: 31/E0
95-12-24
18:35:12:330
NOC3High: 32/E1
95-12-24
14:25:52:720
NOC3High: 32/E3
95-12-24
14:25:52:760
Event list
MEAS ALARM
[C] button functions in the EVENT view
• If there are active indications, press [C] for
2 s to reset
• When there are no active indications, press
[C] for 2 s to reset the recorded events
To Next Page
Loading...
