ABB REM615 ANSI 5.0 FP1 - Page 28

28 REM615 ANSI 5.0 FP1 MOTOR PROTECTION AND CONTROL
—

Description Type test value Reference
Dielectric tests




Impulse voltage test
μ
μ


Insulation resistance measurements  
Protective bonding resistance  
—

Description Type test value Reference
Vibration tests (sinusoidal)

 
Shock and bump test


 
Seismic test  
—

Description Type test value Reference
Dry heat test





Dry cold test




Damp heat test




Change of temperature test




Storage test






—

Description 
LV directive 
Standard


—

Description 
EMC directive 
Standard 
—

Description 
