31
—
Characteristic
Operation accuracy
DEFLPDEF
Depending on the frequency of the measured current: f
n
Current:
n
Voltage:
n
Phase angle:
DEFHPDEF
Current:
n
n
)
n
)
Voltage:
n
Phase angle:
Start time
Minimum Typical Maximum
DEFHPDEF
I
Fault
DEFLPDEF
I
Fault
Reset time
Reset ratio
Retardation time
Operate time accuracy in definite time mode
Operate time accuracy in inverse time mode
Suppression of harmonics
RMS: No suppression
n
Peak-to-Peak: No suppression
1 Not included in REM615
with nominal frequency injected from random phase angle, results based on statistical distribution of 1000 measurements
3 Includes the delay of the signal output contact
1 Not included in REM615
2 For further reference, see the Operating characteristics table
—
Parameter Function Step
Start value
DEFLPDEF
n
DEFLPDEF
n
Directional mode
DEFLPDEF and DEFHPDEF
—
Time multiplier
DEFLPDEF
DEFHPDEF
Operate delay time
DEFLPDEF
DEFHPDEF
Operating curve type
DEFLPDEF
Definite or inverse time
DEFHPDEF
Definite or inverse time
Operation mode DEFxPDEF
To Next Page
Loading...
