Parameter Values (Range) Unit Step Default Description
Operation mode 0=Pulsed
1=Toggle
-1=Off
-1=Off Operation mode for generic control point
Pulse length 10...3600000 ms 10 1000 Pulse length for pulsed operation mode
Description SPCGGIO1
Output 16
Generic control point description
3.15 Factory settings restoration
In case of configuration data loss or any other file system error that prevents the
IED from working properly, the whole file system can be restored to the original
factory state. All default settings and configuration files stored in the factory are
restored. For further information on restoring factory settings, see the operation
manual.
Section 3 1YHT530004D05 D
Basic functions
138 615 series
Technical Manual
To Next Page
Loading...
