Need help?Do you have a question about the ABB REF615R and is the answer not in the manual?
General| Type | Feeder Protection Relay |
|---|---|
| Frequency | 50/60 Hz |
| Binary Outputs | 8 |
| Display | LCD |
| Communication Protocols | IEC 61850, Modbus, DNP3 |
| Protection Functions | Overcurrent, Earth fault, Thermal overload, Under/over voltage, Frequency protection |
| Mounting | DIN rail |
| Operating Temperature | -25°C to +55°C |
| Weight | 1.5 kg |
Software components enabling system tools to communicate with IEDs.
Specifies required versions for PCM600 and IED connectivity packages.
Creating, managing, opening, and exporting PCM600 projects.
Establishing communication via Ethernet using IEC 61850 protocol.
Instructions for installing connectivity packages via installer or Update Manager.
Activating installed connectivity packages within the Update Manager.
Configuring IP addresses for IED front and rear ports via LHMI or PCM600.
Step-by-step guide to create a new project in PCM600.
Matching PCM600 IED object IP with the physical IED IP.
Importance of matching technical keys between IED and PCM600 for configuration.
Modifying IED application configuration using function block diagrams.
Tool for changing configuration and setting parameters via LHMI, WHMI, or PCM600.
Updating communication configuration in the IED.
To Next Page
