Need help?Do you have a question about the ABB REA 10 Series and is the answer not in the manual?
General| Type Designation | REA 10 |
|---|---|
| Category | Relays |
| Frequency | 50/60 Hz |
| Product Name | REA 10 Series |
| Power Consumption | < 3 VA |
| Number of Output Relays | 1 |
| Relay Contact Rating | 5 A / 250 V AC |
| Mounting | DIN rail |
| Contact Configuration | SPDT |
| Mechanical Life | 10, 000, 000 operations |
| Electrical Life | 100, 000 operations at rated load |
| Coil Power Consumption | < 3 VA |
| Storage Temperature | -40°C to +70°C |
Selects between three-phase or two-phase and neutral current measurement.
Captures, amplifies, and compares light to a pre-selected reference level.
Details the high-speed galvanically isolated IGBT outputs and relay output.
Describes connection of extension units via ports A and B and their protection.
Details the delay of outputs HSO2 or TRIP3 for circuit-breaker failure.
Monitors operating voltage and prevents relay operation if a fault is detected.
Specifies rated current, continuous load current, and dynamic current withstand.
Details trip contacts HSO1, HSO2, TRIP3, and signal contacts IRF.
Specifies rated voltages, operating ranges, and control current.
Details selectable operate time delays and accuracy for CBFP.
Lists current and neutral current setting steps and operation accuracy.
Specifies the operate times for HSO1/HSO2 and TRIP3.
Details EMC immunity test levels for various disturbance types.
Details conducted RF emission, radiated RF emission, and SWC tests.
Key information required when placing an order for the product.
Provides an example of how to specify order numbers and quantities.
Lists the specific order numbers for REA 101 and its extension units.
Lists order numbers and lengths for pre-manufactured fiber sensors.
To Next Page
