• The communication engineering details are protocol dependent.
• The connectivity package creates the IEC 61850 configuration for vertical
communication automatically and it is directly suitable, in most cases, for IEC
61850 client configuration. In smaller projects, when Relion series of IEDs are
involved, the internal IEC 61850 configuration tool can be used for horizontal
communication. When non-Relion IEDs are involved or when the projects are
bigger, a tool like IET600 can be used.
• The Communication Management tool is used for communication protocols; for
example, Modbus and DNP3.
The IED restarts automatically when writing an IED configuration
where changes have been made. It is not possible to communicate with
the IED during restart.
1MRS240044-IB A Section 2
IED engineering process
REF615R 21
Engineering Manual
To Next Page
Loading...
Need help?
General
