Section 1 Introduction
1.1 This manual
The application manual contains descriptions of preconfigurations. The manual can
be used as a reference for configuring control, protection, measurement, recording
and LED functions. The manual can also be used when creating configurations
according to specific application requirements.
1.2 Intended audience
This manual addresses the protection and control engineer responsible for
planning, pre-engineering and engineering.
The protection and control engineer must be experienced in electrical power
engineering and have knowledge of related technology, such as communication
and protocols.
1MRS756785 A Section 1
Introduction
REM630 3
Application Manual
To Next Page
Loading...
