ABB SACE Emax 2 Series - Accessories; Preliminary Considerations; Introduction; Accessory Combination Tables

ABB | SACE Emax 2
Accessories | 1 - Preliminary considerations27 | © 2018 ABB | 1SDH001316R0002 - ECN000086018 - Rev. C
Accessories
1 - Preliminary considerations
Introduction
All the circuit-breakers have a series of electrical and mechanical accessories that can be applied according
to the circuit-breaker type, and a series of electronic accessories that can be applied according to the type
of Ekip trip unit equipping the circuit-breaker.
Accessory combination tables
The following table shows the possible combinations of the electrical and mechanical accessories for E1.2:
Type of accessory Accessory Circuit-breakers Switch-disconnectors
Electrical signalling
AUX 4Q S R
AUX 15Q R R
Ekip AUP
(1)
R R
Ekip RTC R R
S51 S -
S33 M/2 R R
Electrical control
YO
(4)
- YC R R
YO2
(4)
R R
YU
(2)(4)
R R
M R R
YR R -
Security mechanical
KLC - PLC R R
KLP - PLP
(1)
R R
SL
(1)
S S
DLC R R
Anti-insertion lock S S
MOC R R
FAIL SAFE
(3)
R R
Protection mechanical
PBC R R
IP54 R R
HTC-LTC R R
PB R R
Interlocks MI R R
S: Standard. R: on request.
(1)
For withdrawable version only.
(2)
Incompatible with FAIL SAFE. Can be ordered for UL on request
(3)
Incompatible with YU; standard for UL version.
(4)
A maximum of two accessories are available for YO and YU.
The following table shows the possible combinations of the electrical and mechanical accessories for E2.2-
E4.2-E6.2:
Type of accessory Accessory
Circuit-
breakers
Switch-
disconnectors
Derived versions
CS MV MTP
Electrical signalling
AUX 4Q S R - - -
AUX 6Q R R - - -
AUX 15Q
(5)
R R - - -
Ekip AUP
(1)
R R R R R
Ekip RTC R R - - -
S51 S - - - -
S51/2
(6)
R - - - -
S33 M/2 R R - - -
Electrical control
YO
(4)
- YC R R - - -
YO2
(4)
- YC2 R R - - -
YU
(2)(4)
R R - - -
YU2
(2)(4)
R R - - -
M R R - - -
YR R - - - -
Continued on the next page