ABB SACE Emax E1.2 - Settings; Main frequency; Modules; Monitor time

ABB | SACE Emax 2
Electronic accessories | 3 - Ekip Measuring modules183 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
Continued from the previous page
The following table shows the measurements and commands accessible from the menus:
Measurement or
control
Description
U Min
It shows the history of the minimum line-to-line voltage measurements in the form
of a histogram (see page 53).
U Max
It shows the history of the maximum line-to-line voltage measurements in the
form of a histogram (see page 53).
P Max
It shows the history of the maximum active power measurements in the form of a
histogram (see page 53).
P Mean
It shows the history of the mean active power measurements in the form of a
histogram (see page 53).
Q Max
It shows the history of the maximum reactive power measurements in the form of
a histogram (see page 53).
Q Mean
It shows the history of the mean active power measurements in the form of a
histogram (see page 53).
S Max
It shows the history of the maximum apparent power measurements in the form
of a histogram (see page 53).
S Mean
It shows the history of the mean apparent power measurements in the form of a
histogram (see page 53).
Power factor Shows the value of the power factor.
Energy counters Shows the values of active, reactive and apparent energy.
Reset counters It resets the energy counters.
RESET Energy
It opens a list of the parameters for programming the resetting of the energy
counters (see page 51).
Voltage 12
Shows the waveform of the phase-to-phase voltage U12, acquired at the
moment of selection (see page 54).
Voltage 23
Shows the waveform of the phase-to-phase voltage U23, acquired at the
moment of selection (see page 54).
Voltage 31
Shows the waveform of the phase-to-phase voltage U31, acquired at the
moment of selection (see page 54).
The following table shows the path for accessing the configuration parameters of the modules from the
display:
Settings
…
Main frequency
Phase Sequence
Modules
Local/Remote
Local bus
…
Ekip Measuring
Voltage Transf.
Rated voltage
Primary voltage
Secondary voltage
Power flow
Neutral connection
…
Functions
Monitor time
Power Controller
…
Continued on the next page