ABB ScreenMaster RVG200 - Power Supply Connections

Accessing the recorder connection terminals
Referring to Fig. 3:
1. Press the terminal cover release plate in recess
A and
pull terminal cover
B away from the recorder body to
expose the terminal connections.
Power supply connections
Referring to Fig. 4:
1. Make connections to the power supply terminals
(module position E) as follows:
– AC supply: terminals 1 (line), 2 (neutral), 3 (ground)
or
– DC supply: terminals 4 (+), 5 (–)
Fig. 3 Accessing the recorder connection terminals
Note. Tighten terminal screws to a torque of
0.1 Nm (0.9 lbf.in).
Fig. 4 Power supply connections and fuse ratings
3
5
4
+
–
3
1
2
L
N
ABCD E
1
2
3
4
5
Warning. Use fuse rating 500 mA (max.) Type T
(UL category JDYX2)
Warning. Use fuse rating 2.5 A (max.) Type T
Neutral
Fuse 500 mA Type T IR = 100 A
Fuse
2.5 A Type T
AC Supply
DC Supply
100 to 240 V
50/60Hz
24VDC
Module positions
Power
supply
terminals –
see below
Line
AC power supply
earth (ground)
stud
6 CI/RVG200–EN