14/16
1 HDU 05004-YN Rev. C
11 List of Components
Item Designation Fig.
No.
1 Motor (with cover 1a) 1
2 Operating spindle (with cover 2a) and gear-train 1
3 Auxiliary switch 1
4 Mounting plate 1
5 Terminal strip 1
6 Control contractor 1
8 Auxiliary pin for emergengy operation -
9 Supply lead plate (with earthing connection angle 23 and ventilating hole 16) 1
10 Operating shaft 1
11 Anticondensation heater 1
12 Housing (with door 12a) 1
13 Control disc 1
14 Safety contract 1
15 Cover for emergency operation (undertachable by chain) 1
16 Cable gland with filter insert 1
17 Limit switch -
18 Swivelling emergency crank -
19 Blocking magnet 1
20 Push button 1
21 Door sealing gasket 1
23 Earthing connection angle 1
24 Mounting holes of operating mechanism (thread M16) -
25 Miniature Circuit Breaker -
26 Flexible earthing connection 1
27 Power block terminal strip 1
29 Changeover swith (Local-OFF-Remote) -
30 Push button (Close-Open) -
31 Operating lever -
35 Handle -
37 Rectifier 1
39 Varistor 1
42 Compartment for instructoin and wiring and diagrams -
43 Rating plate -
51 Interlock switch blocking magnet 19 -
To Next Page
Loading...
