Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
Malfunctions during operation
September 2014 HZTL2498_EN Revision A
Charge air pressure too low
Engine output and engine speed unchanged, air intake condition normal
Gas line between engine and
Maladjusted injection system
Maladjusted valve control
Line to manometer leaky Repair it.
Dirty filter silencer, causing
excessive loss of pressure
Dirty compressor / turbine
Contact ABB Turbocharging
Exhaust counterpressure too
Clean or repair boiler or exhaust
Charge-air pressure too high
Engine performance and engine speed unchanged, suction condition
normal
Engine Malfunction in the injection
system
Repair or contact manufacturer
Engine performance higher
than expected
Check engine performance
Manometer display defective
© Copyright 2014 ABB. All rights reserved.