Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
September 2014 HZTL2498_EN Revision A
3.1
A carefully designed oil supply, which functions under all operating
conditions, is an important precondition for trouble-free operation of the
turbocharger.
Lubrication of the turbocharger is normally carried out with oil from the
engine oil circuit.
Regarding the oil supply, follow the engine manufacturer's instructions
concerning selection of lubricating oil, oil change intervals, oil filtration,
and oil pressure and temperature.
A lubricating oil filter system with a filter mesh size of ≤ 0.034 mm is
adequate for this turbocharger.
© Copyright 2014 ABB. All rights reserved.
To Next Page
Loading...
