ABB TPL65-A32 - Page 84

Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
Disassembly and assembly
8
Removing and fitting filter silencer or air
suction branch
8.3
Page 82
September 2014 HZTL2498_EN Revision A
 Dismantle insulation where necessary.

Pass the lifting gear through the rib on the filter silencer.

Pass the lifting gear through the lugs on the back.
 Unscrew the nuts (72027) and remove them together with their
washers (72018).
 Remove the filter silencer and it set down to one side.
 Fit the filter silencer in reverse order.
Removing the filter
silencer
Installing the filter silencer
© Copyright 2014 ABB. All rights reserved.