ABB TPL65-A32 - Page 91

Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
Disassembly and assembly
8
Dismantling and installing the turbine
diffuser and nozzle ring
8.6
Page 89
September 2014 HZTL2498_EN Revision A

Position clamp (90921) over stud (61036) until it lies flat against inner
radius of gas outlet casing.
 Insert extension (A) of torque spanner (B) through clamp hole and only
loosen screws (61056) one after other.
 Do not yet remove the screws (61056) and Verbus Ripp® washers
(61057).
© Copyright 2014 ABB. All rights reserved.