Operation Manual / TPL69-A10 / -A30 ... TPL77-A10 / -A30
5 Maintenance / 5.5 Cleaning components mechanically
© Copyright 2018 . All rights reserved. HZTL2481_EN Revision C May 2018
4. When the cartridge group is suspended horizontally, attach a chain
block to the swivel lifting eye and attach to the first crane.
5. Tighten chain block until entire cartridge group is suspended from
first crane.
6. Remove loop from second crane.
CAUTION
Selection of the cleaning agent
Cleaning agents which contain chlorine attack metals.
u Use only pH-neutral cleaning agents which do not attack metals.
u Observe safety data sheet.
u Fill the tank with soaking liquid.
u Only immerse the cartridge group until all blades are covered with
cleaning agent.
NOTICE
Heating the liquid
To shorten the soaking time the liquid can be heated to maximum
60ºC.
Page 68 / 136
To Next Page
Loading...
Need help?
General
