Operation Manual / TPL73-B.. - 85-B11/ -B12
8 Disassembly and assembly / 8.9 Installing cartridge group
© Copyright 2018 . All rights reserved. HZTL2480_EN Revision D July 2018
CAUTION
Locked safety segments (76080) during assembly
The safety segments (76080) are not in the operating position. Addi-
tional axial securing of the two compressor casings (74000/76000) is
not guaranteed.
u Fit four nuts (74027) complete with washers (74018), equally spaced
around circumference, and tighten.
u Loosen the nuts (90458) on the threaded studs of the three securing
segments (76080) on the compressor casing internal part (76000).
The compressor casing internal part (76000) is now secure relative to
the compressor casing external part (74000).
NOTICE
Note control dimension (s). The safety segments (76080) are again in
the operating state.
Control dimension s [mm]
Dimension TPL73-B TPL77-B TPL80-B TPL85-B
s 12.1 12.9 11.9 18.5
u Put the nuts (90458) back in the toolbox.
Page 120 / 151
To Next Page
Loading...
