To Next PageTo Next PageHow to deal with rubbing of rotating parts in ABB TPS 52E01 Industrial Equipment?
If you notice rubbing of rotating parts within your ABB Industrial Equipment, and there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
Why is my ABB Industrial Equipment start-up sluggish?
A sluggish start-up of your ABB Industrial Equipment can be attributed to several factors. The turbocharger may be contaminated and needs cleaning. Alternatively, there could be a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other possible causes include a rubbing rotor or a foreign object present in the turbocharger.
What to do if ABB TPS 52E01 has vibration?
If your ABB Industrial Equipment is vibrating, it could be due to rotor unbalance, in which case you should contact an ABB Turbocharging Service Station. Other potential causes include a damaged turbine or compressor, or a damaged bearing.
Is rubbing of rotating parts in ABB TPS 52E01 Industrial Equipment a problem?
Rubbing of rotating parts in ABB Industrial Equipment can be normal behavior and not a malfunction. However, if there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
General| Brand | ABB |
|---|---|
| Model | TPS 52E01 |
| Category | Industrial Equipment |
| Language | English |
Explains the manual's purpose and scope for the user.
Describes the turbocharger's components and operating principles.
Specifies authorized applications and critical warnings for safe use.
Provides guidelines for storing new and spare turbocharger parts correctly.
General guidelines and organizational measures for safe operation and handling.
Explains symbols and terms used throughout the operation manual.
Details the information found on the turbocharger's identification plate.
Provides contact details for ABB Turbo Systems service stations.
Introduces safety aspects, residual risks, and operator responsibilities.
States compliance of ABB turbochargers with relevant EU machinery directives.
Explains mandatory safety signs, PPE, and warning/caution symbols.
Provides guidelines for safe operation, work area safety, and maintenance procedures.
Details potential hazards from mechanical, noise, heat, electrical, and chemical sources.
Addresses turbocharger tolerance and post-deflagration inspection recommendations.
Outlines requirements for periodic checks of "simple pressure vessels".
Provides safety instructions and procedures for lifting turbocharger assemblies and components.
Details the importance and requirements of the turbocharger's lubrication oil supply system.
Describes preventive visual controls, monitoring, and measuring checks before commissioning.
Procedures for recommissioning the turbocharger after a period of inactivity.
Discusses noise levels, measurement, and necessary insulation measures for compliance.
Outlines regular visual checks, monitoring, and functional checks for maintaining operation.
Provides guide values for component replacement intervals based on operating hours.
Explains the speed measuring system, its components, and troubleshooting.
Details procedures for safely stopping oil-cooled and water-cooled turbochargers.
Introduces the maintenance section, covering visual checks and cleaning tasks.
Details methods for cleaning compressor stages during and after operation.
Explains processes for cleaning turbine components during operation with various methods.
Outlines manual cleaning procedures for parts like the filter silencer and cartridge group.
Lists causes and solutions for start-up issues, vibrations, and rotating part problems.
Explains turbocharger surging, its causes, potential damage, and surge blows.
Covers issues like low oil pressure, speed variations, and high exhaust gas temperature.
Addresses noises during run-down and short run-down times.
Troubleshoots problems related to signal, amplitude, and speed readings from the measuring system.
Illustrates methods for suspending turbochargers during transport and handling.
Provides weights for different turbocharger models for lifting and installation planning.
Step-by-step guide for disconnecting lines and physically removing the turbocharger from the engine.
Detailed instructions for mounting, securing, and connecting the turbocharger to the engine.
Sets preconditions and general advice for disassembly and assembly procedures.
Lists the weights of individual turbocharger components for handling.
Covers removal/installation of casing, insulation, cartridge, nozzle ring, and diffuser.
Instructions for installing cartridge, nozzle ring, and related parts in the turbine section.
Details measurements for axial (A) and radial (N, R) clearances.
Specifies torque values for screw fittings during assembly and reassembly.
Procedures for safely shutting down the turbocharger, including cover plate fitting.
Provides drawings and dimensions for manufacturing a protective cover plate.
Outlines mothballing measures based on lubricating oil condition and short-term inactivity.
Details alternatives and storage requirements for long-term engine inactivity.
Safety precautions for handling damaged insulation and its dust exposure.
Specifies environmentally compatible disposal methods for different component materials.
Information required for ordering spare parts and how to obtain them from service stations.
Exploded views of the turbocharger and cartridge group with numbered parts and descriptions.
