Operation Manual / TPS48-D/E.. - TPS61-D/E..
Page 36
April 2015 HZTL2410_EN Revision D
All lubricating oils used for engines are admissible.
Oil inlet viscosity and temperature
The oil-inlet temperature must not exceed 105°C. Permissible oil-inlet
viscosities and oil-inlet temperatures are shown in the following chart.
1) Kinematic viscosity (mm
2
/s = cSt)
2) Oil-inlet temperature (°C)
A Permissible range
Falling below the minimum oil inlet temperature
Serious machine or property damage can be caused by excessively
high oil viscosity and the resulting lack of oil in the bearings.
Do not allow the oil inlet temperature to fall below the minimum 30 ºC
when starting the engine.
The oil inlet temperature must never be less than 10 °C.
© Copyright 2015 ABB. All rights reserved.
To Next Page
Loading...
Need help?
General
