ABB TRIO-7.5-TL-OUTD - Page 21

- 21 -
000318CG
2 - Characteristics
Table: Technical Data TRIO-5.8-TL-OUTD TRIO-7.5-TL-OUTD TRIO-8.5-TL-OUTD
Rated Output Frequency (fr) 50 Hz / 60 Hz
Output Frequency Range (fmin...fmax) 47...53 Hz / 57…63 Hz
(2)
Nominal Power Factor (Cosphiacr)
> 0.995, adj. ± 0.9 with
Pacr =5.22 kW,
adj. ± 0.8 with max
5.8kVA
> 0.995, adj. ± 0.9 with
Pacr =6.75 kW,
adj. ± 0.8 with max
7.5kVA
> 0.995, adj. ± 0.9 with
Pacr =7.65 kW,
adj. ± 0.8 with max
8.5kVA
Total Current Harmonic Distortion < 2%
AC Connections Type Screw terminal block max cross-section 10 mm
2
Output protection
Anti-islanding Protection Complying with the local standard
Maximum AC Overcurrent protection 10.5 A 12.0 A 15.0 A
Output overvoltage protection - Varistors 4, plus gas arrester
Operating performance
Maximum Efciency (η
max) 98.0%
Weighted Efciency (EURO/CEC) 97.4% / - 97.5% / - 97.5% / -
Power Supply Threshold 32 W 36 W 36 W
Stand-by Consumption < 15 W
Night-time consumption <5W
(3)
Night-time Consumption (Reactive Power) 55 VAR
Inverter Switching Frequency 15.8 kHz
Communication
Wired Local Monitoring (opt.) Ethernet board with webserver (opt.), PVI-USB-RS232_485 (opt.)
Remote Monitoring (opt.)
Ethernet board (opt.),VSN300 Wi Logger Card (Opt.),
PVI-AEC-EVO (Opt.), VSN 700 Data Logger (Opt.)
Wireless Local Monitoring (opt.) VSN300 Wi Logger Card (opt.)
User Interface Graphic Display
Environmental
Ambient temperature -25...+60°C /-13...140°F with derating above 50°C/122°F
Storage temperature -40...80°C (-40...+176°F)
Relative Humidity 0...100% condensing
Noise Emission < 45 db(A) @ 1 m
Maximum operating altitude 2000 m / 6560 ft
External environment pollution rating 3
Environmental class Outdoor
Physical
Environmental Protection Rating IP 65
Cooling System Natural
Overvoltage rating as per IEC 62109-1 II (DC input) III (AC output)
Dimensions (H x W x D)
641mm x 429mm x 220mm / 25.2” x 16.9” x 8.7”
855mm x 429mm x 237mm / 33.7” x 16.9” x 9.3” with cover open
Weight 25.0 kg / 55.1 lb 28.0 kg / 61.7 lb 28.0 kg / 61.7 lb
Assembly System Wall bracket
Safety
Safety class I
Insulation level Without transformer (TL)
Marking CE
Safety and EMC Standards
EN62109-1, EN62109-2, AS/NZS3100, AS/NZS 60950, EN61000-6-2,
EN61000-6-3, EN61000-3-2, EN61000-3-3
Grid Standard
CEI 0-21, CEI 0-16, VDE 0126-1-1, VDE-AR-N 4105, G83/1, C10/11,
EN 50438 (not for all national variants), RD1699, RD 1565, ABNT
NBR 16149
1. The output voltage range may vary according to the grid standard of the country of installation
2. The output frequency range may vary according to the grid standard of the country of installation
3. <2W in Stand-by mode
Note. Features not specically mentioned in this data sheet are not included in the product