- 39 -
000019DG
General conditions
Some recommendation apply only to large size product or multiple small size packings.
Transport and handling
Transport of the equipment, especially by road, must be carried out with
by suitable ways and means for protecting the components (in particular,
the electronic components) from violent shocks, humidity, vibration, etc.
During handling, do not make any sudden or fast movements that
can create dangerous swinging.
Lifting
ABB usually stores and protects individual components by suitable
means to make their transport and subsequent handling easier, but as a
rule it is necessary to turn to the experience of specialized staff in change
of loading and unloading the components.
Where indicated and/or where there is a provision, eyebolts or handles,
which can be used as anchorage points, are inserted and/or can be
inserted.
The ropes and means used for lifting must be suitable for bearing the weight of the equipment.
Do not lift several units or or parts of the equipment at the same time,
unless otherwise indicated.
Unpacking and checking
We remind you that the packaging elements (cardboard, cellophane,
staples, adhesive tape, straps, etc.) may cause cuts and/or injuries if not
handled with care. They should be removed by suitable means and not
left in the hands of irresponsible people (e.g., children).
The components of the packaging must be disposed on in accordance with the regulations in
force in the country of installation.
When you open the package, check that the equipment is undamaged
and make sure all the components are present.
If you nd any defects or damage, stop unpacking and consult the carrier,
and also promptly inform the Service ABB.
4
Lifting and transport
To Next Page
Loading...
Need help?
General