ABB TRIO-7.5-TL-OUTD - Settings Menu

- 83 -
000332CG
7 - Operation
Settings Menu
Selecting STATISTICS from the three main sub-menus brings up the rst
screen, asking for the password.
The default password is "0000".
This can be changed by using the display buttons, following the same
procedure as always:
• ENTER scrolls through the digits (from left to right)
• ESC returns to the previous digit (from right to left)
• Press ESC several times to return to the previous menus
• DOWN scrolls down the numerical scale (from 9 to 0)
• UP scrolls up the numerical scale (from 0 to 9)
After entering the password, press ENTER to access the information in
this section:
Settings
Address
Display Set
Service
New PW
Cash
Date/Time
Language
Vstart
DOWN
ENTER
Password 0000
ENTER
UP
1
DOWN UP
DOWN UP
DOWN UP
DOWN UP
DOWN UP
DOWN UP
DOWN UP
2
3
4
5
6
7
8
Autotest
DOWN UP
9 *
Alarm
Remote ON/OFF
Sleep Mode
UV Prot. time
Reactive Power
MPPT
Power Reduction
Input mode
DOWN UP
10
DOWN UP
DOWN UP
DOWN UP
DOWN UP
DOWN UP
DOWN UP
11
12
13
14
15
16
17
PMU Board
Ethernet Board
DOWN UP
DOWN UP
18 **
19 ***
(*) Available for the Italian country
standard only. Refer to the section
on this topic in the manual.
(**) Available only when the ac-
cessory PMU Expansion Board is
installed
(***) Available only when the ac-
cessory Ethernet Expansion Bo-
ard is installed