Electromagnetic Flowmeter
WaterMaster 5 Start-up and Operation
36 IM/WM Issue 7
5.3.2 Entering Passwords
To select password characters and enter passwords:
1. Scroll to the 'Access Level' screen and select the required access level. Press the key to display
the 'Enter Password' screen.
2. Use the and keys to scroll to and highlight the first password character to be selected.
3. Press the key to select the highlighted character (add it to the password set).
4. Use the and keys to highlight the next password character to be selected.
5. Repeat steps 2 to 4 until all characters have been added to the password.
6. Press the key to accept the password and display menus available at the requested access level.