Electromagnetic Flowmeter
WaterMaster 4 Electrical Installation
IM/WM Issue 7 17
4 Electrical Installation
4.1 Grounding
Caution. For safety reasons and optimum performance, the flowmeter, pipelines and medium must be
correctly bonded and grounded according to regulations.
Note.
The flow sensor must not be connected to a ground spike.
For bonding connections use ≥ 4mm
2
(< 10AWG) cable.
Fig. 4.1 All Metal Pipe (Including Lined Metal Pipe)
Fig. 4.2 Metal Pipe with Flange Adaptor
Optional fluid contact ring for lined pipes
To Next Page
Loading...
