Abbott FreeStyle Lite - Troubleshooting; Test Fails to Start After Blood Application

21
What It Means What To Do
2. The test
does not
start after
applying
the blood
drop.
• Blood drop is too small 1. Add blood to the same sample area within
60 seconds, or repeat the test using a new
test strip and a larger blood drop.
• Defective test strip
• Sample applied after
meter turns o
1. Repeat the test using a new test strip. Wait for
and
to appear before applying blood or
control solution.
2. If problem persists, contact Customer Care.
• Defective meter 1. Contact Customer Care.
www.AbbottDiabetesCare.com
English