Abbott Pima ANALYSER - 4 ANALYSIS MENU; Changing Operator and Sample ID During Test; Analysis Menu Options

9
1
2
3
4
5
6
7
8
22 4 ANALYSIS MENU
Changing Operator and Sample ID during a Test Run
Should the operator discover that an error has been made in the entry of
Operator and / or Sample ID, these entries can be changed as long as the
cartridge is not removed from the Pima Analyser.
Aer removal of the cartridge no changes to the selected Operator or
entered Sample ID are possible anymore.
Changes to Operator and Sample ID can be made through the «Analysis
Menu» which is accessed by pressing ⌨.
Analysis Menu
The «Analysis Menu» can only be
accessed while an analysis is in progress
and allows the operator to change the
Operator and Sample ID
as well as abort the test run.
Change Operator ID
• To change the Operator ID during the analysis, select «Operator» from the
«Analysis Menu» and conrm with 〈. Select a dierent operator from
the «Operator List» or select «New Operator» to enter a new operator.
Any new operator will be automacally added to the «Operator List».
Conrming the operator with 〈 will re-open the «Analysis in Progress»
window.
Change Sample ID
• To change a Sample ID during the analysis, select «Sample ID» from the
«Analysis Menu» and conrm with 〈. This opens the «Enter Sample»
window and the Sample ID can be edited. Conrming the edited Sample ID
with 〈 will re-open the «Analysis in Progress» window.
4 ANALYSIS MENU
2020-11-01 11:05
Operator
Sample ID
Abort Analysis
ANALYSIS MENU