Abbott Pima ANALYSER - Volume Error: Insufficient Sample Volume

9
1
2
3
4
5
6
7
8
46
Volume Error
Before each analysis, the Pima
Analyser checks the sample volume
loaded on the Pima test cartridge.
If the Pima Analyser detects
insucient volume the following
window is displayed.
Press 〈 or ⌨ and the «Abort
Analysis» window opens.
The operator can overrule this error message by selecng «NO» in the
«Abort Analysis» window and the analysis process will connue.
Overruling Error 201 will be documented on the result pages.
2020-11-01 11:05
FAILURE
No sample
detected
Error 201
9 ERROR WARNINGS & MESSAGES