Abit AB9 Pro - Page 40

 FanEQ Control
µGuru Utility v1.00C
ABIT EQ
FanEQ Control
► 1st FanEQ Group Press Enter Item Help ►►
► 2nd FanEQ Group Press Enter
↓↑ →← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
 1st FanEQ Group
Click <Enter> key to enter its submenu (1st FanEQ Group):
µGuru Utility v1.00C
ABIT EQ
1st FanEQ Group
CPU FanEQ Control Enabled Item Help ►►►
-Reference Temperature CPU Temperature
-Control Temperature High 76°C/168°F
-Control Temperature Low 66°C/150°F
-Fan PWM Duty Cycle High 100 %
- Fan PWM Duty Cycle Low 60 %
NB FanEQ Control Enabled
-Reference Temperature SYS Temperature
-Control Temperature High 40°C/104°F
-Control Temperature Low 30°C/86°F
-DC Fan Voltage High 12.0 V
-DC Fan Voltage Low 8.0 V
SYS FanEQ Control Enabled
-Reference Temperature SYS Temperature
-Control Temperature High 40°C/104°F
-Control Temperature Low 30°C/86°F
-DC Fan Voltage High 12.0 V
-DC Fan Voltage Low 8.0 V
↓↑ →← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
CPU/NB/SYS FanEQ Control
When set to [Enabled], these items control the CPU, NB, and/or SYS fan speed by the following
setting combinations.
3-8 AB9 Pro, AB9