Abit AB9 Pro - Onboard Pci Device

- USB Mouse Support via
Select [BIOS] for the legacy operating system (such as DOS) that does not support USB
mouse.
OnChip Audio Controller
This option enables or disables the audio controller.
 Onboard PCI Device
Click <Enter> key to enter its submenu:
Phoenix – AwardBIOS CMOS Setup Utility
Onboard PCI Device
Onboard LAN1 Controller Enabled Item Help
- Invoke Boot Agent Disabled
Onboard LAN2 Controller Enabled
- Invoke Boot Agent Disabled
SIL3132 SATA Controller Enabled
- SATA Mode IDE
JMB363 SATA Controller Enabled
OnBoard 1394 Controller Enabled

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Onboard LAN 1 Controller
This option enables or disables the LAN1 controller.
Onboard LAN 2 Controller (For model “AB9 Pro”)
This option enables or disables the LAN2 controller.
- Invoke Boot Agent
This item allows you to use the boot ROM (instead of a disk drive) to boot up the system and
access the local area network directly.
SIL3132 SATA Controller
This item enables or disables the Onboard SATA controller for SATA7 and eSATA1 port.
- SATA Mode
This item determines the mode for Onboard Serial ATA.
[IDE]: The onboard Serial ATA served as IDE mode.
3-20 AB9 Pro, AB9