To Next Page

To Previous Page

Wallbox eMH2 – Testing the RCCB |

English

Testing the RCCB

To ensure the continuing safe operation of the wallbox, the function of the RCCB must be tested regularly

according to locally applicable regulations (e.g. every 6months in Germany): For this purpose, the RCCB

has a push button with which to initiate the test function.

Proceed as follows to test the RCCB:

1 Open the housing cover of the wallbox with

the housing cover key and put it aside.

2 Open the access flap of the internal electronic

components cover.

3 Locate and press the push button engraved T

or marked Test.

y The RCCB must now trip and flick its pivot

lever into the centre position.

4 Now flip the pivot lever first to the 0 position

and then back to the I position.

5 Close the access flap, hook the housing cover

onto the upper edge of the housing base and

lock it using the housing cover key.

Danger

Dangerous electrical currents

Should the RCCB malfunction during testing, you must not continue to operate the wallbox under any

circumstances!

 Contact a qualified specialist electrical contractor to have the error resolved.

Other manuals for ABL Wallbox eMH2

Questions and Answers:

Need help?

Do you have a question about the ABL Wallbox eMH2 and is the answer not in the manual?

General